China Cap Screen Printing Machine
Description
Download
Reviews
China Cap Screen Printing Machine: What Closure Printers Compare
Closures are a different printing problem from bottles. A cap is small, it is printed in enormous volumes, and the artwork usually has to wrap the side wall and land on the top face in register. Buyers sourcing a China cap screen printing machine therefore compare fixture accuracy and parts handling long before they compare top speed, because a cap that rotates half a degree in the chuck produces a rejected batch, not a rejected print.
The machines on this page are the closure side of the Sunshine range: a linear platform built for caps and closures, and two rotary platforms that index caps on a carousel so top and side decoration happen inside one cycle. All three are supplied from Huizhou, Guangdong, with chucks machined to your cap drawing and curing matched to the ink you already run.
Every figure below is taken from the published datasheet of the model itself.
Cap Screen Printing Machine Specifications
| Model | Type | Printing speed | Cap size range | Curing | Air supply | Power / size |
|---|---|---|---|---|---|---|
| SAP-103-S | Linear, closures | 4,000-5,000 pcs/h | Dia. 15-60 mm, length 25-200 mm | UV / LED | 0.6-0.8 MPa | 380 V, 50 Hz / 2300 x 1400 x 2300 mm |
| SAP-106S | Rotary carousel | 3,000-3,600 pcs/hr | Dia. 15-34 mm, length 25-60 mm | UV, 6 kW | 0.6 MPa | 380 V, 50 Hz / 3300 x 1900 x 2900 mm |
| SAP-106 | Five-colour rotary | 1,800-2,400 pcs/hr | Dia. 15-90 mm, length 25-330 mm | LED / UV | 0.6 MPa | 380 V, 50 Hz |
How to read the table. SAP-103-S is the high-output linear machine for standard closures up to 60 mm diameter and 200 mm length, and it is the model most buyers start with for single- or two-colour cap decoration. SAP-106S is the compact rotary: below 34 mm diameter it indexes parts on a carousel, so multi-colour work stays inside one cycle instead of moving between stations. SAP-106 is the wider rotary for larger closures up to 90 mm diameter and up to 330 mm length, where five colours are needed on a premium closure. Throughput and colour count trade against each other: the five-colour platform runs slower per hour, but it produces a finished cap rather than a partly decorated one.
Applications: Where These Cap Printers Run
Beverage closures are the highest-volume application: water and CSD caps, sports caps and flip-tops, where a logo or a two-colour brand mark has to sit square on the top face. Cosmetic closures are the opposite case — low volume, high value, often metal or aluminium shells with a fine-line print that shows every registration error. Pharmaceutical closures need short runs and controlled handling, typically with hygiene covers over the print zone. Household and agrochemical caps often carry tamper-evident bands and print on both the top and the side wall.
If your closures are standard screw caps in the 15-60 mm band, the linear route is usually the better fit: the automatic silk screen printing machine for bottle closures handles top and side decoration with a fixture per cap, and changeover is a chuck swap plus a recipe recall.
If instead you are printing multi-colour caps at high volume — cosmetic caps, premium spirits closures, small dropper caps — the rotary route wins on cycle time and colour count: the automatic multi-color rotary screen printing machine keeps every colour station on the same carousel, so the cap is never re-chucked between colours.
One point worth checking before you commit: whether your capping line is fed by an unscrambler or by trays. Cap printers are usually rated in pieces per hour at the print head, not at the bagger, and the feeding method is what decides whether you actually reach the datasheet number.
Frequently Asked Questions
Can one machine print both the cap top and the cap side?
Yes, within the fixture design. Top printing uses a flat chuck that presents the disc face; side printing uses a rotating chuck that rolls the cap wall past the screen. The same platform can carry both, but each cap size needs its own chuck set. Send the cap drawing — diameter, height, wall taper and where the decoration must sit — and we will confirm how many fixture sets your range needs.
What cap diameter range can these machines handle?
The datasheets define the mechanical range: SAP-103-S covers 15-60 mm diameter and 25-200 mm length, SAP-106S covers 15-34 mm diameter and 25-60 mm length, and SAP-106 covers 15-90 mm diameter and 25-330 mm length. Anything inside those windows is a fixture question rather than a machine question; anything outside them needs a different frame.
What do you need from me to quote cap printing accurately?
Cap material (PP, PE, HDPE, aluminium, tinplate), diameter and height, decoration area, number of colours, target output per hour and the feeding method on your line. A 3D file or a physical sample lets us test print with your ink before shipment. If the caps are for food, beverage or pharma use, tell us at enquiry stage so the ink and cure configuration is specified for that application from the start.
Why Buyers Choose Sunshine for Cap Printing
Chucks machined to the cap, not borrowed from a bottle
Cap decoration fails at the chuck before it fails at the screen. Each closure size gets a chuck cut to its actual diameter, wall taper and height, so the cap seats on centre line and the print lands in the same place on piece one and piece fifty thousand. When the closure changes, the chuck is re-cut rather than the machine being replaced.
Top and side decoration in one cycle
A cap is usually printed on two surfaces: the disc face and the side wall. On the rotary platforms both stations sit on the same carousel, so the cap is printed, cured and unloaded without being re-chucked between colours. That is what keeps registration tight on multi-colour closures and removes the handling damage that comes from moving small parts between machines.
Handling built for small parts at speed
Small parts are where feeding systems usually break down. The closure platforms are set up for either unscrambler feed or tray feed, with air consumption in the 0.6-0.8 MPa range and cycle rates from 1,800 to 5,000 pieces per hour depending on model and colour count. We size the feeding method against the rate you actually need, not the headline figure on the datasheet.
Cure and hygiene matched to the closure
Beverage and pharmaceutical closures sit next to the product, so the cure configuration matters as much as the print. LED curing runs cooler and suits heat-sensitive plastic caps; UV lamp curing is specified where the ink demands it. Print zones can be guarded for hygiene-sensitive lines, and food-contact-compatible ink systems are specified at enquiry stage rather than retrofitted later.